bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Ford Exhaust Tips


  • Should I Replace Resonated Exhaust Tips With Non-Resonated Exhaust Tips On a 2017 Dodge Charger
  • I don't really have a bunch of technical data to back this up but I am also very familiar with the exhaust system on your 2017 Dodge Charger. That said, the resonated vs non-resonated exhaust tips won't really matter much if at all. If you like the looks of them then I would say just keep them but if not you can add a set of aftermarkets while you are changing out the mufflers and resonators to install bullet mufflers or otherwise known as glass-packs. I will say, the route you are taking...
    view full answer...

  • Will a Resonated Exhaust Tip Make Exhaust Sound Louder on a Truck
  • Using a resonated exhaust tip such as # PM-5104 would make the exhaust sound more crackly, for lack of a better term, than the stock exhaust and it might be a little louder. If you want to keep the exhaust note the same then a tip like # MF35212 would be a better way to go. It fits a 2-3/4 to 3 inch diameter exhaust pipe. If you want a deep and louder sound then you would want a cat-back exhaust system. For that I would need to know the year, make, and model truck you have, bed length,...
    view full answer...

  • How To Increase Exhaust Sound on 2014 Mazda 3
  • The size of the exhaust tip has very little if at all to do with sound so the exhaust tips you just purchased are more or less for show. However, if you were to use a resonated exhaust tip such as the Bully Round Resonated Bolt-on Exhaust Tip part # PM-5104 then this would produce a slightly more crackly sound. With that being said, the best way to really change the sound of your exhaust for the better is with a cat-back system, the MagnaFlow Cat-Back Exhaust System part # MF15297 for hatchback...
    view full answer...

  • How to Resonated Exhaust Tips Affect Sound of Exhaust
  • Resonator exhaust tips will slightly mellow the tone of the exhaust but you'd most likely not notice much of a difference. Since the resonators are straight through they can't really quiet anything down.
    view full answer...

  • How is Edge Jammer Exhaust Tip # EP87700 Held On
  • The Edge Jammer Exhaust Tip # EP87700 that you referenced is held on with a band clamp like how most exhaust systems are held together.
    view full answer...

  • Will Adding an Exhaust Tip Cause a 2008 Ford Fiesta to Fail Inspections
  • The great thing about exhaust tips that clamp on, such as # MF35212 as an example, is that you can take it off, have your safety and emissions tests done, and put it back on afterward. This will ensure that the vehicle does not fail inspections based on any exhaust tip added. It is unlikely that the addition of an exhaust tip would cause the vehicle to fail inspections though so I would not worry about it. We have a lot of exhaust tips, see link, and the ones that fit will be based on...
    view full answer...

  • Will Using a Resonator Exhaust Tip Keep Exhaust Note Deep and Loud on a 1993 Olds Cutlass Ciera
  • Changing the muffler will make the biggest impact to the exhaust note on a vehicle. Since you have installed a straight pipe glass pack muffler, which is one of the louder options but not necessarily the most deep and throaty sounding option, an exhaust tip won't make much difference in my opinion. With that said if anything is going to make a difference it would be a resonator tip such as # PM-5104. It is a good investment either way since it is stainless steel and resists corrosion naturally...
    view full answer...

  • Recommended Exhaust Tip for 2014 Infinity Q50 with 2 Inch Pipe
  • For your 2014 Infinity Q50, the 2-1/2 inch inlet on the carbon fiber tips is too large for your 2 inch exhaust pipes. The only fit we have for your size pipes is the Bully Round Resonated Bolt-on Exhaust Tip, 3-1/4" Round, 9" Long # PM-5104. If you want to enhance your vehicle instead of just the look or sound of the exhaust, I recommend the MagnaFlow Cat-Back Exhaust System - Stainless Steel # MF15310 which is a confirmed fit for your vehicle.
    view full answer...

  • Availability of Exhaust System for 2005 Chevrolet Corvette C6
  • For a 2005 Chevrolet Corvette C6 I have the MagnaFlow Stainless Steel Axle-Back Exhaust System, part # MF15886. This is an axle-back system that will install from the axle back to the tailpipe. The polished stainless steel quad tips ( dual tips on each side) are 4 inch diameter. The diameter on the mandrel bent tubes is 2-1/2 inches that connect the system to your exhaust system. I am including a link to the installation instructions on the axle-back system. There is also a cat-back systems...
    view full answer...

  • Cat-Back Exhaust System Recommendation for 2018 Chevy Colorado
  • Exhaust tips like the MagnaFlow 4" Exhaust Tip # MF35212 are purely decorative. They would not change the sound at all. You'd need to go with a cat-back system like the part # MF19018 if you wanted to change the sound. This also comes with a nicer looking exhaust tip too. It will increase performance as well. I realize as a gift this might be a bit pricey, but maybe he's your favorite son... This fits all of the gas engine versions of the 2018 Chevy Colorado as well.
    view full answer...

  • Will the Bully Round Resonated Bolt-On Exhaust Tip Increase Horsepower
  • The Bully Round Resonated Bolt-on Exhaust Tip part # PM-5104 will slightly change the exhaust note (more crackly) of your 2014 Mazda 3 but it will not increase horsepower/torque. In order to increase horsepower/torque you will need to obtain a cat-back exhaust system, MagnaFlow Cat-Back Exhaust System part # MF15297 for hatchback or part # MF15294 for sedan models which does so by reducing restrictions allowing the engine to breath better. According to MagnaFlow, the above systems will...
    view full answer...

  • Recommended Turndown Exhaust Tips For 2015 Honda Odyssey
  • We do offer exhaust tips that are designed to be installed with the angle pointed downward. If you have a 3 inch tailpipe you would need part # MF35180. For 2-3/4 inch you would need part # MF35179, for 4 inch tailpipes you can use part # MF35181, and for 3-1/2 inch you would need part # MF35178. These are all weld-on exhaust tips and should be installed by a certified professional welder. And thank you for being a repeat customer at etrailer.com
    view full answer...

  • Exhaust Hanger Bending Recommendation to for More Clearance with Draw-Tite Hitch on a 2012 VW Golf
  • What I would try first would be to bend the exhaust hangers that hold the rear of the exhaust up so that once you put the exhaust back on the hangers the tips will be high enough that they would not come into contact with the Draw-Tite Sportframe Trailer Hitch # 24825. Thats what we usually do here in our shops and can be very effective. Try not to get too crazy with bending the hanger, but a little bit should do the trick. I attached an FAQ video for you to check out that shows how you...
    view full answer...

  • Cargo Carrier for 2011 Honda Pilot That Wouldnt Require Using a Turn-Down Exhaust Tip
  • If you use the link I've provided, you can see the turndown exhaust tips we have available. You'll need to measure the outside diameter of your tailpipe in order to get the correct tip. I don't have a ready reference that would tell me the diameter of the exhaust pipe of your Pilot. In order to place your cargo carrier as far away as possible from the exhaust pipe, I'd recommend using a carrier with a long shank that's angled raise the cargo platform as much as possible. The Curt 24x60...
    view full answer...

  • Curt Hitch Recommendation for a 2000 Chevy Corvette Convertible with Quad Tip Exhaust
  • Yes, since the quad tip exhaust you have on your 2000 Chevy Corvette is part of the stock exhaust system the Curt Hitch part # C11034 that you referenced would work for you. For trailer wiring you would want the # 18252, for a ball mount # C45521, # A-82 for a 2 inch ball, # A-80 for a 1-7/8 inch ball
    view full answer...

  • Replacement Muffler for a 2000 Chevy Blazer to Increase Sound Output
  • An exhaust tip like the part # MF35212 would certainly look good on your 2000 Chevy Blazer, but it isn't going to change the sound of your exhaust. For that you would need to replace your current muffler with something like the # MF11215 as this will increase the sound quite a bit since it is a straight through muffler. The inlet and outlet of the muffler is 2-1/4 inches which will match what you have on your vehicle's exhaust. You would want to have a muffler shop cut out your current...
    view full answer...

  • Which Draw Tite Hitch Fits 1994 Toyota Camry with Factory Exhaust
  • So I sent the picture you sent me to Draw Tite to see which hitch is the correct fit for your 1994 Toyota Camry and they informed me that based on your picture you have the factory setup and can fit either hitch. He recommended the # 36336 for you.
    view full answer...

  • Swinging Enclosed Cargo Carrier and Exhaust Heat
  • If your vehicle has the exhaust coming straight out the back, then it could melt the carrier due to the heat created by the engine and exited through your exhaust. The only solution in these situations is to redirect the exhaust down or out to the side of the vehicle. We have many different styles of exhaust tips that may work for your application. I have posted links to our complete exhaust tip selection. The direction of the exhaust discharge is always an important consideration when...
    view full answer...

  • How to Make a 2019 Ford Mustang Eco-Boost Sound More Like a Race Car
  • Exhaust tips like the Bully Round Resonated Bolt On Exhaust Tip # PM-5104 will definitely change the sound coming from your 2019 Ford Mustang and may make it slightly louder, but they're not going to be the best solution to give your car the aggressive, race car style sound you may be looking for. If you're wanting a deep and throaty sound when you punch the throttle, I recommend getting a new exhaust system like the MagnaFlow Race Series Axle Back Exhaust System # MF19345 . On top of...
    view full answer...

  • Would Bully Round Resonated Bolt-on Exhaust Tip # PM-5104 Fit 2013 Chevy Camaro V6
  • The Bully Round Resonated Bolt-on Exhaust Tip # PM-5104 is designed to fit on pipes with an out diameter that's between 1-3/4 inches and 2-1/2 inches. This would easily be compatible with the factory tailpipes of your Camaro. It won't really affect exhaust tone to a significant degree. Since you don't have mufflers currently this might lower the sound level a tiny bit but realistically you probably wouldn't notice it.
    view full answer...